To use a homebrew, you must go through the Album application. Once in the home screen of your Switch, even if nothing seems to have changed visually, you are well on your CFW. You can remove the dongle and jig in the console. The LED on the dongle should change color (Blue = Atmosphere | Green = ReiNX | Red = SX OS). Hold the keys until the console boots to the CFW (a handful of seconds). Now you have to press and hold the volume button (+) and press the power button. Plug the dongle into the console's USB port. Unplug the right joycon and install the jig instead. Be careful that it is not on standby mode. To do this, first of all, it must be turned off completely. Now we are going to boot the Switch in RCM mode. When the copy is complete, eject the memory card correctly so as not to corrupt the data. Once your selection is made, download the zip and extract it at the root of your memory card.
You can use this site which allows you to automatically download ready-made configurations, or you can customize them. Be careful, this will erase ALL DATA on the card! Although not necessary, it is advisable to format the card in exFAT. If all goes well, it should be detected as a USB drive. Plug the memory card into your computer (Linux, Windows or Mac). The color tells you which CFW will be used: To choose the CFW to use, you must press the + button on the dongle for at least 3 seconds. A full charge lasts 1 hour and allows up to 1000 uses, which leaves a good autonomy in nomadic mode. To do this, simply plug it into a USB port on your PC or onto any standard USB charger. since 5.6 Hekate also have a failsafe for update the payload, if you boot an old Hekate.bin payload, when hekate boots on the console it autodetect the old version and automatically reload the file on SD:/bootloader/update.Before first use, the dongle must be recharged. So when Hekate get updated, you don't need to update your injector, simply copy the new Hekate payload.bin to SD:/argon/autolaunch.bin and voilà you get updated and don't need to mess with the injector, sometimes is a pain on the butt to update the injector, and you avoid to waste the NAND life of the device. When you use ArgonNX-SE ( ), you injector (RCM Loader, Atmosphère NX, Trinket, TegraRCM, TegraRCMGUI, Rekado, etc.) for ever will inject the payload of ArgonNX that payload run a program on your SD card (SD:/argon/sys/argon-nx-gui.bin), that program could then autoboot the file SD:/argon/autolaunch.bin or show a graphic menu for you to select a set of payloads on the SD:/argon/payloads.
0 kommentar(er)
